Compliance with design constraints

In this project, the aim was to meet the constraints and standards that were set for this project and basic specification for the system such as the output voltage range, higher power factor, and a low total harmonic distortion with THD = 2.14 %. However, The system was designed as a closed-loop operation powered by an input AC voltage of 340V, following by a sepic converter, resulting in the Output DC voltage 48 V and to achieve the specific voltage and to get efficiency equal to 98.64%. Table 4-2 below shows the comparison between each constraint and the obtained results.

Table ‎4‑2 Compliance with design constraints.